R-shox 2.7 Shock absorbers -COILOVER series. This offer is directed to all off-road  vehicle owners who have their vehicles modified in professional manner and use their vehicles in extreme terrain.

These absorbers are intended to be used with 2,5" coil springs ( two coil springs per absorber), because of that the cylinder is threaded on the outside. In the mounting kit you will find nuts and coil  guide rod. The absorber kit does not include coil springs. We have multiple coil springs in our offer. You have to choose the right type of coil springs for your vehicle and purchase them separately.
R-shox 2.7 COILOVER are made only with eyelet/eyelet fixing only. There are ball joints on both ends  – uniball type. This system makes driving more pleasant and enables filtering of all unnecessary vibrations and shocks.

R-shox are equipped with enhanced size of oil-gas cylinders with radiators. Their big  surface greatly improves cooling properties along with damping and shock filtering. Because most parts are made of alloys, a lot of heat (which is generated during dynamic driving) is given off which makes our absorbers very stable and improves damping properties

R-shox 2.7 COILOVER  are 2 times more efficient and  have better heat tolerance than professional absorbers 2'' they  are also about 10% better than 2.5''
This kind of absorbers may be additionally equipped with double external system of  damping regulation which is adjusted with a knob located at the lower part of absorber where the second one is located on the cylinder -  22 levels of compression regulation and 23 levels of rebound regulation
Additionally we can adjust the inner damping force to required parameters according to vehicles' weight and its intended use.  In such case you need to fill out a special form (below) and enter all needed parameters.
Absorbers are available in multiple lengths ( as you may see in the catalog) we can also make them custom size.

R-shox absorbers are equipped with a unique bearing protection system - uniball, thanks to special external polymer seals and hollowed out lubricating system with a ball fitting.
Our lubrication system significantly increases the life of uniball bearings -  It is clearly  noticeable in winter condition where lots of salt and sand is used on the roads. The system also shows resistance against water and sand in extreme off-road conditions.
All absorbers manufactured by our company can be easily disassembled and in case of any problem  easily repaired. We also offer spare parts to all types of absorbers offered.


coilover1
COILOVER 2,7" – Shock Absorbers with an additional cylinder.

Catalog number
 Travel Length comp.
(mm)
Length
ext.
(mm)
Mounting
Diameter
mounting
Cylinder
diameter
Cylinder
length
 (mm)
RS3001NC
8" (200mm)
455
655
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3002NC
10"(250mm)
505
755
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3003NC
12"(300mm)
555
855
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3004NC
14"(360mm)
615
975
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS3005NC
16"(410mm)
665
1075
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS3006NC
18"(460mm)
715
1175
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340

Shock Absorbers – COILOVER 2,7" with an additional cylinder and exterior  13-level regulation of bound.

Catalog number
 Travel Length comp.
(mm)
Length
ext.
(mm)
Mounting
Diameter
mounting
Cylinder
diameter
Cylinder
length
(mm)
RS3001NCA
8" (200mm)
455
655
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3002NCA
10"(250mm)
505
755
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3003NCA
12"(300mm)
555
855
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS3004NCA
14"(360mm)
615
975
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS3005NCA
16"(410mm)
665
1075
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS3006NCA
18"(460mm)
715
1175
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340

Shock Absorbers COILOVER 2,7" with an additional cylinder with external 13-level regulation of bound and 23-level regulation of rebound.

Catalog number
Travel
Length comp.
(mm)
Length
ext.
(mm)
Mounting
Diameter
mounting
Cylinder
diameter
Cylinder
length
(mm)
RS2001NCFA
8" (200mm)
455
655
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS2002NCFA
10"(250mm)
505
755
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS2003NCFA
12"(300mm)
555
855
eyelet/eyelet
12mm/12mm
2,7" (68mm)
200
RS2004NCFA
14"(360mm)
615
975
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS2005NCFA
16"(410mm)
665
1075
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340
RS2006NCFA
18"(460mm)
715
1175
eyelet/eyelet
12mm/12mm
2,7" (68mm)
340

Additional Information:

1. Absorbers are sold ready to use - filled with oil, filled with gas,
2. There is possibility of absorber adjustment according to vehicle's weight,
3. Possibility of additional adjustment of absorbers for a specific vehicle,
4. Each absorber is fully demountable and may be regenerated,
5. Special fixing mounts to order - 14mm,16mm,18mm
6. For special order we offer special "rod" mounting with diameters 12mm, 14mm and 16mm
7. Absorbers are sold WITHOUT coil springs,
8. All absorbers due to their specific off-road use and in sport competitions have limited 12 month warranty.

Price list:
download in PDF  ico_pdf

Galleries