These absorbers are intended to be used with 2,5" coil springs ( two coil springs per absorber), because of that the cylinder is threaded on the outside. In the mounting kit you will find nuts and coil guide rod. The absorber kit does not include coil springs. We have multiple coil springs in our offer. You have to choose the right type of coil springs for your vehicle and purchase them separately.
R-shox 2.7 COILOVER are made only with eyelet/eyelet fixing only. There are ball joints on both ends – uniball type. This system makes driving more pleasant and enables filtering of all unnecessary vibrations and shocks.
R-shox are equipped with enhanced size of oil-gas cylinders with radiators. Their big surface greatly improves cooling properties along with damping and shock filtering. Because most parts are made of alloys, a lot of heat (which is generated during dynamic driving) is given off which makes our absorbers very stable and improves damping properties
R-shox 2.7 COILOVER are 2 times more efficient and have better heat tolerance than professional absorbers 2'' they are also about 10% better than 2.5''
This kind of absorbers may be additionally equipped with double external system of damping regulation which is adjusted with a knob located at the lower part of absorber where the second one is located on the cylinder - 22 levels of compression regulation and 23 levels of rebound regulation
Additionally we can adjust the inner damping force to required parameters according to vehicles' weight and its intended use. In such case you need to fill out a special form (below) and enter all needed parameters.
Absorbers are available in multiple lengths ( as you may see in the catalog) we can also make them custom size.
R-shox absorbers are equipped with a unique bearing protection system - uniball, thanks to special external polymer seals and hollowed out lubricating system with a ball fitting.
Our lubrication system significantly increases the life of uniball bearings - It is clearly noticeable in winter condition where lots of salt and sand is used on the roads. The system also shows resistance against water and sand in extreme off-road conditions.
All absorbers manufactured by our company can be easily disassembled and in case of any problem easily repaired. We also offer spare parts to all types of absorbers offered.

COILOVER 2,7" – Shock Absorbers with an additional cylinder.
Catalog number |
Travel | Length comp. (mm) |
Length ext. (mm) |
Mounting |
Diameter mounting |
Cylinder diameter |
Cylinder length (mm) |
RS3001NC |
8" (200mm) |
455 |
655 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3002NC |
10"(250mm) |
505 |
755 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3003NC |
12"(300mm) |
555 |
855 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3004NC |
14"(360mm) |
615 |
975 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS3005NC |
16"(410mm) |
665 |
1075 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS3006NC |
18"(460mm) |
715 |
1175 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
Shock Absorbers – COILOVER 2,7" with an additional cylinder and exterior 13-level regulation of bound.
Catalog number |
Travel | Length comp. (mm) |
Length ext. (mm) |
Mounting |
Diameter mounting |
Cylinder diameter |
Cylinder length (mm) |
RS3001NCA |
8" (200mm) |
455 |
655 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3002NCA |
10"(250mm) |
505 |
755 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3003NCA |
12"(300mm) |
555 |
855 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS3004NCA |
14"(360mm) |
615 |
975 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS3005NCA |
16"(410mm) |
665 |
1075 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS3006NCA |
18"(460mm) |
715 |
1175 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
Shock Absorbers COILOVER 2,7" with an additional cylinder with external 13-level regulation of bound and 23-level regulation of rebound.
Catalog number |
Travel |
Length comp. (mm) |
Length ext. (mm) |
Mounting |
Diameter mounting |
Cylinder diameter |
Cylinder length (mm) |
RS2001NCFA |
8" (200mm) |
455 |
655 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS2002NCFA |
10"(250mm) |
505 |
755 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS2003NCFA |
12"(300mm) |
555 |
855 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
200 |
RS2004NCFA |
14"(360mm) |
615 |
975 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS2005NCFA |
16"(410mm) |
665 |
1075 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
RS2006NCFA |
18"(460mm) |
715 |
1175 |
eyelet/eyelet |
12mm/12mm |
2,7" (68mm) |
340 |
Additional Information:
1. Absorbers are sold ready to use - filled with oil, filled with gas,
2. There is possibility of absorber adjustment according to vehicle's weight,
3. Possibility of additional adjustment of absorbers for a specific vehicle,
4. Each absorber is fully demountable and may be regenerated,
5. Special fixing mounts to order - 14mm,16mm,18mm
6. For special order we offer special "rod" mounting with diameters 12mm, 14mm and 16mm
7. Absorbers are sold WITHOUT coil springs,
8. All absorbers due to their specific off-road use and in sport competitions have limited 12 month warranty.
Price list:
download in PDF

Galleries
View the embedded image gallery online at:
http://rshox.com/index.php/catalogprice-list/4-coilover-shock-absorbers#sigProId216136d0fc
http://rshox.com/index.php/catalogprice-list/4-coilover-shock-absorbers#sigProId216136d0fc