R-shox 2.7 Absorbers - NON-COIL. This offer is directed especially to all professionally built off-road vehicles  which have gone through multiple modifications.
This type of shock  absorber is a non-coil type. Coil springs are not intended to be used with them.

R-shox 2.7 NON-COIL  is made with eyelet fixings only.
There are ball joints on both ends  – uniball type. This system makes driving more pleasant and enables filtering of all unnecessary vibrations and shocks.
R-shox are equipped with enhanced size of oil-gas cylinders (which are mostly built of alloys) with radiators. Their big  surface greatly improves cooling properties along with damping and shock filtering.

R-shox 2.7 NON-COIL  are 2 times more efficient and  have better heat tolerance than professional absorbers, they  are also about 10% better than 2.5".
This kind of absorbers may be additionally equipped with double external system of  damping regulation which is adjusted with a knob located at the lower part of absorber where the second one is located on the cylinder -  22 levels of compression regulation and 23 levels of rebound regulation.

Additionally we can adjust the inner damping force to required parameters according to vehicles' weight and its intended use.  In such case you need to fill out a special form (below) and enter all needed parameters.
Absorbers are available in multiple lengths ( as you may see in the catalog) we can also make them custom size.
R-shox absorbers are equipped with a unique bearing protection system - uniball, thanks to special external polymer seals and hollowed out lubricating system with a ball fitting.
Our lubrication system significantly increases the life of uniball bearings -  It is clearly  noticeable in winter condition where lots of salt and sand is used on the roads. The system also shows resistance against water and sand in extreme off-road conditions.

All absorbers manufactured by our company can be easily disassembled and in case of any problem  easily repaired. We also offer spare parts to all types of absorbers offered.


non-coil_ig
Shock Absorbers NON-COIL 2,7" with an additional cylinder
Technical Specifications of  R-shox NON COIL  in version:
-Without regulation " ...NC"

Catalog
Number.
 Travel Length
MIN axle/axle (mm)
Length
MAX
axle/axle
(mm)
Rod diameter
(mm)
Mounting type
Mounting diameter
(mm)
Diameter of gas/oil
Cylinder  (mm)
Length of gas/oil
cylinder (mm)
RS2001NC
8" (200mm)
342
542
22
eyelet/eyelet
 12 / 12
  68
200
RS2002NC
10"(250mm)
392
642
22
eyelet/eyelet
 12 / 12
 
  68 200
RS2003NC
12"(300mm)
442
742
22
eyelet/eyelet
 12 / 12
  68 200
RS2004NC
14"(360mm)
502
862
22
eyelet/eyelet
 12 / 12
  68 340
RS2005NC
16"(410mm)
552
962
22
eyelet/eyelet
 12 / 12   68 340
RS2006NC
18"(460mm)
602
1062
22
eyelet/eyelet
 12 / 12   68 340

Shock Absorber NON-COIL 2,7" with an additional cylinder and external 13-level bound regulation.

Catalog
Number.
Travel
Length
MIN axle/axle (mm)
Length
MAX
axle/axle
(mm)
Rod diameter
(mm)
Mounting type
Mounting diameter
(mm)
Diameter of gas/oil
Cylinder  (mm)
Length of gas/oil
cylinder (mm)
RS2001NCA
8" (200mm)
393
542 22
eyelet/eyelet
  12 / 12   68 200
RS2002NCA
10"(250mm)
443
642 22
eyelet/eyelet
  12 / 12   68 200
RS2003NCA
12"(300mm)
493
742 22
eyelet/eyelet
  12 / 12   68 200
RS2004NCA
14"(360mm)
553
862 22
eyelet/eyelet
  12 / 12   68 340
RS2005NCA
16"(410mm)
599
962 22
eyelet/eyelet
  12 / 12   68 340
RS2006NCA
18"(460mm)
650
1062 22
eyelet/eyelet
  12 / 12   68 340

Shock Absorber NON-COIL 2,7" with an additional cylinder and external 13-level bound regulation and 23-level rebound regulation.

Catalog
Number.
 Travel Length
MIN axle/axle (mm)
Length
MAX
axle/axle
(mm)
Rod diameter
(mm)
Mounting type
Mounting diameter
(mm)
Diameter of gas/oil
Cylinder  (mm)
Length of gas/oil
cylinder (mm)
RS2001NCFA
8" (200mm)
393
593
22
eyelet/eyelet
  12 / 12   68 200
RS2002NCFA
10"(250mm)
443
693
22
eyelet/eyelet
  12 / 12   68 200
RS2003NCFA
12"(300mm)
493
793
22
eyelet/eyelet
  12 / 12   68 200
RS2004NCFA
14"(360mm)
553
913
22
eyelet/eyelet
  12  /12   68 340
RS2005NCFA
16"(410mm)
599
1005
22
eyelet/eyelet
  12 / 12   68 340
RS2006NCFA
18"(460mm)
650
1107
22
eyelet/eyelet
  12 / 12   68 340

Additional information:

1. Absorbers are sold ready to use - filled with oil, filled with gas,
2. Possibility of additional adjustment of absorbers for a specific vehicle according to its weight and intended use,
3. Each absorber is fully demountable and may be regenerated,
4. We can adjust absorbers multiple times for an extra fee,
5. All absorbers due to their specific off-road use and in sport competitions have limited 12 month warranty.

Price list:
download in PDF ico_pdf

Galleries