This type of shock absorber is a non-coil type. Coil springs are not intended to be used with them.
R-shox 2.7 NON-COIL is made with eyelet fixings only.
There are ball joints on both ends – uniball type. This system makes driving more pleasant and enables filtering of all unnecessary vibrations and shocks.
R-shox are equipped with enhanced size of oil-gas cylinders (which are mostly built of alloys) with radiators. Their big surface greatly improves cooling properties along with damping and shock filtering.
R-shox 2.7 NON-COIL are 2 times more efficient and have better heat tolerance than professional absorbers, they are also about 10% better than 2.5".
This kind of absorbers may be additionally equipped with double external system of damping regulation which is adjusted with a knob located at the lower part of absorber where the second one is located on the cylinder - 22 levels of compression regulation and 23 levels of rebound regulation.
Additionally we can adjust the inner damping force to required parameters according to vehicles' weight and its intended use. In such case you need to fill out a special form (below) and enter all needed parameters.
Absorbers are available in multiple lengths ( as you may see in the catalog) we can also make them custom size.
R-shox absorbers are equipped with a unique bearing protection system - uniball, thanks to special external polymer seals and hollowed out lubricating system with a ball fitting.
Our lubrication system significantly increases the life of uniball bearings - It is clearly noticeable in winter condition where lots of salt and sand is used on the roads. The system also shows resistance against water and sand in extreme off-road conditions.
All absorbers manufactured by our company can be easily disassembled and in case of any problem easily repaired. We also offer spare parts to all types of absorbers offered.

Shock Absorbers NON-COIL 2,7" with an additional cylinder
Technical Specifications of R-shox NON COIL in version:
-Without regulation " ...NC"
Catalog Number. |
Travel | Length MIN axle/axle (mm) |
Length MAX axle/axle (mm) |
Rod diameter (mm) |
Mounting type |
Mounting diameter (mm) |
Diameter of gas/oil Cylinder (mm) |
Length of gas/oil cylinder (mm) |
RS2001NC |
8" (200mm) |
342 |
542 |
22 |
eyelet/eyelet |
12 / 12 |
68 |
200 |
RS2002NC |
10"(250mm) |
392 |
642 |
22 |
eyelet/eyelet |
12 / 12 |
68 | 200 |
RS2003NC |
12"(300mm) |
442 |
742 |
22 |
eyelet/eyelet |
12 / 12 |
68 | 200 |
RS2004NC |
14"(360mm) |
502 |
862 |
22 |
eyelet/eyelet |
12 / 12 |
68 | 340 |
RS2005NC |
16"(410mm) |
552 |
962 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
RS2006NC |
18"(460mm) |
602 |
1062 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
Shock Absorber NON-COIL 2,7" with an additional cylinder and external 13-level bound regulation.
Catalog Number. |
Travel |
Length MIN axle/axle (mm) |
Length MAX axle/axle (mm) |
Rod diameter (mm) |
Mounting type |
Mounting diameter (mm) |
Diameter of gas/oil Cylinder (mm) |
Length of gas/oil cylinder (mm) |
RS2001NCA |
8" (200mm) |
393 |
542 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2002NCA |
10"(250mm) |
443 |
642 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2003NCA |
12"(300mm) |
493 |
742 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2004NCA |
14"(360mm) |
553 |
862 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
RS2005NCA |
16"(410mm) |
599 |
962 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
RS2006NCA |
18"(460mm) |
650 |
1062 | 22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
Shock Absorber NON-COIL 2,7" with an additional cylinder and external 13-level bound regulation and 23-level rebound regulation.
Catalog Number. |
Travel | Length MIN axle/axle (mm) |
Length MAX axle/axle (mm) |
Rod diameter (mm) |
Mounting type |
Mounting diameter (mm) |
Diameter of gas/oil Cylinder (mm) |
Length of gas/oil cylinder (mm) |
RS2001NCFA |
8" (200mm) |
393 |
593 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2002NCFA |
10"(250mm) |
443 |
693 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2003NCFA |
12"(300mm) |
493 |
793 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 200 |
RS2004NCFA |
14"(360mm) |
553 |
913 |
22 |
eyelet/eyelet |
12 /12 | 68 | 340 |
RS2005NCFA |
16"(410mm) |
599 |
1005 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
RS2006NCFA |
18"(460mm) |
650 |
1107 |
22 |
eyelet/eyelet |
12 / 12 | 68 | 340 |
Additional information:
1. Absorbers are sold ready to use - filled with oil, filled with gas,
2. Possibility of additional adjustment of absorbers for a specific vehicle according to its weight and intended use,
3. Each absorber is fully demountable and may be regenerated,
4. We can adjust absorbers multiple times for an extra fee,
5. All absorbers due to their specific off-road use and in sport competitions have limited 12 month warranty.
Price list:
download in PDF

Galleries
View the embedded image gallery online at:
http://rshox.com/index.php/catalogprice-list/5-non-coil-shock-absorbers#sigProId616517ce89
http://rshox.com/index.php/catalogprice-list/5-non-coil-shock-absorbers#sigProId616517ce89